Art: 600; 601; 602

1. COAT THE HALVES OF THE MOLD WITH MOTOR OIL
2. DO NOT USE UNREFINED OIL OR EDIBLE OIL
3. INSERT THE REINFORCING BAR AS SHOWN IN Pict. 7 AND FILL THE MOLD
4. WHERE APPROPRIATE, ENSURE THE PVC TUBES ARE INSERTED CENTRALLY INSIDE THE MOLD AS SHOWN IN Pict. 3
5. ROTATE THE MOLD WHILST FILING IT. ALLOW 24 HOURS TO DRY
6. TO CONSTRUCT THE POOL, FIRST MAKE THE SUMP FOR THE IMMERSED PUMP, AND PLACE THE WATER LINES IN POSITION. THEN ASSEMBLE THE FOUNTAIN BASE AS SHOWN IN Pict. 5 AND 6.
7. ASSEMBLE THE FOUNTAIN AS SHOWN IN Pict. 1 AND 2. CONNECTING THE COMPONENTS WITH WHITE CEMENT OR CONSTRUCTION GLUE
8. MOUNT A BRASS SPRAY NOZZLE, INCORPORATING STONE FIGURE IF REQUIRED