|
- COAT THE INSIDE OF THE MOLD WITH MOTOR OIL (DO NOT USE UNREFINED OIL OR EDIBLE OIL)
- FASTEN THE ROSETTE ON WHICH THE BULB-HOLDER WILL BE MOUNTED TO THE BASEBOARD USING SCREWS IN Pict. 2, ONE WITH THE BODY TOWARDS THE CONCRETE AND TO OTHER THE OPPOSITE WAY ROUND (Pict. 4)
- CLIP THE HALVES OF THE MOLD TOGETHER, AND TIGHTEN WITH NON-ELASTIC ROPE TO KEEP THE SHAPE WHILE THE CONCRETE IS SETTING (Pict. 2)
- INSERT THE CENTRAL METAL TUBE, 1/2" DIAMETER (Pict. 2), AND FILL WITH CONCRETE WHILST ROTATING THE MOLD
- AFTER 24 HOURS, REMOVE THE MOLD AND FIX THE BULB-HOLDER AND BULB TO THE ROSETTE (Pict. 4). INSERT THE ELECTRIC CABLE THROUGH THE PIPE THEN SCREW THE PILLAR ONTO THE CEMENTED EXTENSION OF THE PIPS (Pict. 1)
- MAKE A HOLE IN THE ROSETTE FOR DRAINAGE (Pict. 3) AND FASTEN THE GLOBE BY USING SCREWS PASSING THROUGH THE EDGE OF ROSETTE.
|
|
